   Windows for Workgroups v3.11

   Microsoft Windows* for Workgroups 3.11 Installation Notes for Intel's 
   EtherExpress(TM) PRO/10 LAN Adapter
   =====================================================================
  
   Location of Driver:     \WFW\311\EPRO.386


   General Installation
   --------------------
      NOTE: If you are running Novell NetWare* on this workstation, see 
            the Novell NetWare section of Hints and Tips below before 
            continuing with this installation.

      1. Select the "Network Setup" icon in the Network Group.

      2. If you are replacing a previous LAN adapter select the Remove 
         button to delete that adapter

      3. Click on the Add Adapter button.

      4. Choose Unlisted or Updated Network Adapter.

      5. Insert the adapter driver disk in drive "A" and specify the path 
         A:\WFW\311 for the location of the driver.

      6. Select the Intel EtherExpress PRO adapter.

      7. Specify the correct interrupt and base I/O port settings.  If you 
         are uncertain what the are, make a selection here, and verify 
         through SoftSet2 the proper values.

      8. Choose Close, and when prompted, restart your computer so the 
         changes will take affect.


   Hints and Tips
   --------------

      1. Sample PROTOCOL.INI:
         Windows for Workgroups creates the PROTOCOL.INI for you.  This is 
         provided for reference.  This is a sample with Microsoft Netbeui and 
         IPX/SPX Compatible Transport with Netbios.

         [network.setup]
         version=0x3110
         netcard=ms$epro,1,MS$EPRO,3
         transport=ms$nwlinknb,NWLINK
         transport=ms$ndishlp,MS$NDISHLP
         transport=ms$netbeui,NETBEUI
         lana0=ms$epro,1,ms$netbeui
         lana1=ms$epro,1,ms$nwlinknb
         lana2=ms$epro,1,ms$ndishlp


         [protman]
         DriverName=PROTMAN$
         PRIORITY=MS$NDISHLP

         [MS$EPRO]
         DriverName=EPRO$
         INTERRUPT=5
         IOADDRESS=0x300

         [EPRO]
         Adapters=MS$EPRO

         [NWLINK]

         BINDINGS=MS$EPRO
         [MS$NDISHLP]
         DriverName=ndishlp$
         BINDINGS=MS$EPRO

         [NETBEUI]
         DriverName=netbeui$
         SESSIONS=10
         NCBS=12
         BINDINGS=MS$EPRO
         LANABASE=0

      2. Novell NetWare 
         To install proper driver support for Windows for Workgroups and 
         Novell NetWare on the same workstation, follow these steps:
         
         1. Set up the workstation for connection to NetWare using the 
            DOS ODI client driver.  You must install the DOS ODI client
            driver, IPX.COM does not allow support for Windows for 
            Workgroups.
         
         2. Load the ODI driver and login to your NetWare server.
         
         3. Start Windows for Workgroups and set up the driver for the
            EtherExpress PRO adapter by following the instructions shown 
            above.  When the driver is chosen, Windows for Workgroups 
            will detect the ODI driver is already loaded and automatically 
            install the appropriate support.

         * Third-party trademarks are the property of their respective owners
