   Windows for Workgroups v3.10

   Microsoft Windows* for Workgroups 3.10 Installation Notes for Intel's 
   EtherExpress(TM) PRO/10 LAN Adapter
   =====================================================================

   Location of Driver:     \WFW\310\EPRO.DOS


   Sample Configuration Files
   --------------------------
      CONFIG.SYS (install will add these lines) ***added if running NetWare*

         DEVICE=C:\WINDOWS\PROTMAN.DOS /I:C:\WINDOWS
         DEVICE=C:\WINDOWS\EPRO.DOS
      ***DEVICE=C:\WINDOWS\MSIPX.SYS
         DEVICE=C:\WINDOWS\WORKGRP.SYS
         LASTDRIVE=P

      PROTOCOL.INI (install creates this file) ***added if running NetWare
 
         [network.setup]
         version=0x3100
         netcard=ms$EPRO,1,MS$EPRO
         transport=ms$netbeui,MS$NETBEUI
      ***transport=ms$ipx,MS$IPX
         lana0=ms$EPRO,1,ms$netbeui
      ***lana1=ms$EPRO,1,ms$ipx

         [protman]
         DriverName=PROTMAN$
         PRIORITY=MS$NETBEUI
       
         [MS$EPRO]
         DriverName=EPRO$
         IOADDRESS=0x300
         INTERRUPT=5

         [MS$NETBEUI]
         DriverName=netbeui$
         SESSIONS=10
         NCBS=32
         BINDINGS=MS$EPRO
         LANABASE=0

      ***[MS$IPX]
      ***Drivername=IPX$
      ***MediaType=Novell/Ethernet
      ***Bindings=MS$EPRO

      AUTOEXEC.BAT
         C:\WINDOWS\NET START
      ***C:\WINDOWS\MSIPX
      ***C:\WINDOWS\NETX   


   General Installation
   --------------------
      New Windows for Workgroups Installation:

      1. When installing Windows for Workgroups, you are prompted for a      
         network driver.  Select the "Unlisted or Updated Network Driver".

      2. Insert the adapter driver disk containing OEMSETUP.INF and EPRO.DOS

      3. Specify the directory for the driver (A:\WFW\310) and select the 
         Intel EtherExpress PRO adapter driver.  
  
      4. Select Advanced options, and make sure the parameters match the 
         card settings.  The installation program copies the necessary files 
         and creates PROTOCOL.INI for use with the adapter.   
     
      5. Continue the installation per Windows for Workgroups instructions.


      Existing Windows for Workgroups Installation:

      1. Select the "Control Panel" icon in the Main Group.

      2. Select the "Network" icon.

      3. Select the "Adapters" button.

      4. Select the Add option.

      5. Select "Unlisted or Updated Network Adapter"

      6. Insert the adapter driver disk with OEMSETUP.INF and EPRO.DOS and 
         specify the path A:\WFW\310.

      7. Select the Intel EtherExpress PRO driver.  
  
      8. Specify the correct interrupt and Base I/O Port in the adapter 
         setup.  The installation program copies the necessary files and 
         creates PROTOCOL.INI for use with the adapter.   

      9. Select "Close" and when prompted, restart computer for changes to 
         take affect and complete the installation.

  
      NOTE:  You must have a terminated cable attached to the adapter
             when you start Windows for Workgroups.  If you don't, Windows
             for Workgroups hangs.  
 
   To Add NetWare
   --------------
      1. Select the "Control Panel" icon in the Main Group.

      2. Select the "Network" icon.

      3. Select the "Networks" button.

      4. Select "Novell NetWare" and select the add button.

      5. Select "OK" and close the Network icon.

      6. Select reboot computer and restart Windows.

      * Third-party trademarks are the property of their respective owners.
