Installing NetShield

The following document provides installation procedures for NetShield. For 
further information regarding NetShield, refer to your Using NetShield 
manual.

Overview

NetShield must be installed on every file server you want to be protected. 
(Since NetShield is licensed per file server, please refer to your license 
agreement in order to ensure proper legal compliance.) 

If installing from files that you downloaded from the McAfee BBS or FTP
site, unzip the contents of all four .zip files into separate directories 
then copy the contents of each directory to a floppy disk. Place the first 
floppy disk in drive A: and type:
			   
A:\SETUP.EXE

If installing from CD-ROM, use the XCOPY /S command to copy the files into a 
working directory on your PC. 

Environment
The following criteria must be met in order to run NetShield.

System Requirements

* Novell NetWare 3.X or 4.X, including NetWare Directory Services (NDS) 
  support
* Network Disk Space: 18 MB required, 25 MB recommended
* RAM: Minimum of 718 K free on file server

NOTE: Additional patches are needed for NetWare 3.11 or 3.12 installations 
(refer to "Novell NetWare 3.11 and 3.12 File Server Requirements" later in 
this chapter). NetShield is not compatible with NetWare v3.10.

Administrator Console Requirements

* Operating System: DOS 5.0 or greater
* User Interface: Microsoft Windows 3.1X in enhanced mode
* CPU: 386SX or higher
* RAM: 4 MB
* Monitor: VGA or better

Workstation Requirements

* Operating System: DOS 3.3 or greater
* RAM: Minimum of 640 K

Novell NetWare 3.11 and  3.12 File Server Requirements
NetShield requires some NetWare patch files for NetWare 3.11 and 3.12. 
Use the following recommended versions (in parentheses) or higher:

* A3112.NLM (4.10A)
* AFTER311.NLM (4.10A)
* CLIB.NLM (3.12H)
* MATHLIB.NLM (3.12H)
* MATHLIBC.NLM (3.11H)
* NWSNUT.NLM (4.10G)

NOTE: AIO.NLM and AIOCOMX.NLM are required to use the pager notification 
option. If you intend to use pager notification on a NetWare file server, 
Refer to "Enabling Pager Notification" in Chapter 5, "Notification and 
Reporting,"  in your Using NetShield manual for more information.

NetShield supplies these patches with the CD-ROM release. For BBS release 
users, Novell supplies these patches in the LIBUP4.EXE file. To obtain this 
file

* From Novell, refer to the Novlib Forum on CompuServe, the ftp.novell.com 
  anonymous ftp site on the Internet, or other Novell on-line services.

* From McAfee, download it from the McAfee BBS under File Area "P" 
  (for Patches), or from the mcafee.com ftp site in the pub/patches directory.

The INSTALL.EXE program from LIBUP4.EXE will copy all appropriate files to
your NetWare 3.1x or 4.x file server.

NOTE: (After patch installation, the file server must be downed.)

Before Installation

To install NetShield, you must:

* Login to the network as a SUPERVISOR or equivalent
* Have a drive mapped to your SYS volume or a search drive
* Have at least 4.8 MB (6.8 MB is suggested) available on the PC that will 
  be running the Windows console for the NetShield program, and at least 
  2.4 MB (2.6 MB is suggested) available for the On-Line Documentation
* Have at least 1.5 MB (3.5 MB is suggested) available on the file server 
  that will be running the file server NLMs

If you are installing from CD ROM, use the XCOPY /S command to make a working 
copy of the NetShield distribution CD on your local workstation.

Installing NetShield

Installing NetShield is quick and simple, requiring minimal user input.

Use the following procedure to install NetShield on your network. 
You can exit the installation at any time by choosing Exit in the lower 
right corner of the installation screen, or by pressing F3. 
NetShield must be installed on every server you want to protect.

NOTE: If you are installing on an SFT III system, be sure to load NetShield 
from the MS engine. If you are currently running a previous version of 
NetShield, the NLMs must be unloaded from the file server. 
At the File Server Console, type:

UNLOAD NETSHLD

1.      If you are installing from:

* CD ROM. Place the CD in your CD drive.

* BBS Release. Unzip the compressed files to a working directory on your 
  local workstation.

2.      Choose File | Run from Program Manager and Browse for the 
	SETUP.EXE file in the appropriate directory, or type SETUP 
	at the DOS prompt.

NOTE: The log file INS220.LOG will be created and placed on your Windows 
      directory. The log file is an ASCII file listing the location of the 
      NetShield installation. The log file also lists any errors that 
      occurred during the installation. If an error that prevents the 
      completion of the install process occurs, the log file be displayed 
      automatically.

3.      The Welcome dialog box will be displayed.

Ensure that you have Supervisor or equivalent rights to the destination 
file server.

4.      Choose Continue.

The Installation Configuration dialog box is displayed.

NOTE: The Installation Configuration dialog box displays the required space 
      and the suggested space on the selected volume of the current file 
      server. If there is insufficient space, you must choose a new 
      destination or cancel the installation.

5.      Enter your company name in the Company Name text box.

6.      Select a file server from the provided drop-down list box.

7.      Enter the drive and path that the NetShield Windows Console should 
	be installed to, or choose Browse to locate a path.

8.      Enter the drive and path that the NetShield Server NLMs should be 
	installed to, or choose Browse to locate a path.

9.      Select the On-Line Documents check box to install the Adobe Acrobat 
	Installer Program (to view NetShield documentation on-line).

10.     Choose Workstation Options and select the "Configure Desktop" check 
	box to instruct SETUP to create a McAfee group and program icon.

11.     Choose the Server Options button and select the "Modify AUTOEXEC.NCF"
	check box to instruct SETUP to modify your file servers AUTOEXEC.NCF 
	file to automatically load the NetShield NLM at file server startup.

If you choose to modify AUTOEXEC.NCF, NetShield will add the line 
"NETSHLD" to your existing AUTOEXEC.NCF file. This line references the
NETSHLD.NCF file which contains necessary instructions to launch NETSHLD.NLM.

NOTE: If you choose not to modify the AUTOEXEC.NFC file during installation, 
the NetShield NLM will have to be loaded manually. Refer to "Loading NLMs" 
for details.

12.     Choose Continue.

A dialog box is displayed with a percent completed bar.

If prompted, insert the remaining disks to complete the installation.

The Setup Information dialog box is displayed.

13.     Choose OK to indicate that the installation is complete. 
	View the README file for any updated product information.

NetShield installation is complete. Refer to Chapter 3, "The NetShield 
Console," for a description of NetShields console and features.

Loading NLMs

NetShield must be loaded on the File Server Console. To load the NetShield 
NLM, at the file server type:

NETSHLD.NCF

NOTE: For NetWare 4.X file servers, ensure that DSAPI.NLM is loaded as well.
If you had the SETUP program modify your AUTOEXEC.NCF file, the NetShield 
NLM will be loaded with the file server startup sequence.

NOTE: If NetShield does not exist in your SYS\SYSTEM directory, verify that 
NETSHLD.NCF or AUTOEXEC.NCF contains a valid reference (i.e. a SEARCH ADD 
statement) to the directory containing NetShield.

To unload the NetShield NLM, at the file server type

UNLOAD NETSHLD

For more information about using the file server, refer to Chapter 7, 
"The File Server Console" in your Using NetShield  manual.

-EOF-
