
           Accton Technology Corporation
        NETWARE DRIVER INSTALLATION OVERVIEW
        ====================================

Copyright (c) 1992, 1993 by Accton Technology
Corporation. All rights reserved.

This file describes the contents of the \NETWARE
subdirectory. For more detailed information about
NetWare installation, please refer to the
"NOVELL NetWare ODI Shell for DOS" manual.

List Of Files You Need
----------------------

------------------------------------------------------
Filename        Description
------------------------------------------------------
LSL.COM         This file implements the Link Support
                Layer  for  DOS ODI workstations
                and is  the program that is generally
                loaded first when booting. The Link
                Support Layer file enables the
                workstation to communicate over
                several protocols.

IPXODI.COM      This is Novell's protocol stack for
                DOS ODI workstations. It performs
                the same functions as the IPX.COM, which
                is used for DOS workstations. However
                it is optional and is loaded after the
                LAN driver. Other protocols can be loaded
                in its place or with it. This is one
                of the key features of the ODI
                environment.

NETx.COM        NetWare Network program.
                --------------------------------------
                If you use                You Need
                --------------------------------------
                Conventional memory       NETx.COM

                Expanded memory           EMSNETx.EXE
                (LIM 4.0 EMS Compatible)

                Extended memory           XMSNETx.EXE
                (XMS 2.0 compatible)
                ---------------------------------------

NETBIOS.EXE     The Netbios emulation program
                (INT 5CH interface) allows you to
                run Netbios  application programs
                based  on  the NETBIOS.EXE
                interface. The running sequence is:

                a. IPX shell driver
                   IPX.COM
                   NETBIOS.EXE  ---> netbios emulation
                   ...               interface

                b. DOS ODI driver
                   LSL.COM
                   NWMLID.COM   ---> Accton DOS ODI driver
                   IPXODI.COM
                   NETBIOS.EXE
                   ...
------------------------------------------------------------


For MS-DOS V6.X And The Later
-----------------------------
NETX will check the current DOS version. It support MS-DOS untill V6.0. IF
you use the later version with this NETX, please add a command, "SETVER", in
your CONFIG.SYS file. It is included in your DOS utilities and can cover the
problem about DOS version.


===End===


