# [0] - Lower bar message
"00 00Alt-F4=Exit , Any Key=Continue"
# [1..23] - First screen message
"00 00     Ŀ     "
"00 00      Before you start the installation procedure, make backup copies        "
"00 00      of the distribution disks. Keep the original disks in a safe           "
"00 00      place and use the backup copies for the installation. Two steps        "
"00 00      are required before you can start working with Magic:                  "
"00 00                                                                             "
"00 00      I.   Installation: Copy Magic files to your hard disk.                 "
"00 00      II.  Registration: Obtain a Registration Number from MSE.              "
"00 00                                                                             "
"00 00      For Installation you will need to select a Magic directory (e.g.       "
"00 00      C:\MAGIC) and enter Magic's Serial and Registration Numbers.           "
"00 00                                                                             "
"00 00      For Registration please follow these steps:                            "
"00 00                                                                             "
"00 00      a.   Select a Registration Name. This name will be displayed when      "
"00 00           you first enter the Magic system.                                 "
"00 00      b.   Fill in the Registration Card and fax or mail it to MSE.          "
"00 00           MSE will fax your Registration Number back to you.                "
"00 00      c.   Select the Registration option of this program and enter the      "
"00 00           Registration Name and Number  EXACTLY as specified in the         "
"00 00           previous step (Registration number is case sensitive).            "
"00 00                                                                             "
"00 00          "
# [24] - Installation end message
"00 00Magic installation completed successfully"
# [25..27] - Installation failed message
"00 00 Magic installation unsuccessful"
"00 00 Exit and re-enter to execute"
"00 00 installation phase again"
# [28] - Lower bar exit message
"00 00Any Key=Exit"
# [29] - Registration end message
"00 00Magic registration completed successfully"
# [30..32] - Registration failed message
"00 00 Magic registration unsuccessful"
"00 00 Exit and re-enter to execute"
"00 00 registration phase again"
# [33] - Error message
"00 00 Error opening SETUP.DAT on drive"
# [34] - Error message
"00 00 SETUP.DAT format is wrong"
# [35] - Confirm retry
"00 00 Retry (Y/N)?"
# [36..37]
"00 00 Enter diskette labeled: "
"00 00 in drive "
# [38]
"00 00 Press any key when ready ... "
# [39]
"00 00 Wrong diskette"
# [40]
"00 00 Error reading source drive "
# [41]
"00 00 Error reading destination drive "
# [42..43]
"00 00 Error writing "
"00 00 disk full"
# [44]
"00 00 not found on the source drive"
# [45]
"00 00 Error copying "
# [46]
"00 00 Extracting "
# [47]
"00 00 Extract error"
# [48]
"00 00 Copying from "
"00 00  to "
# [50]
"00 00Failed"
# [51]
"00 00Copied"
# [52]
"00 00 Error reading DISK.ID file"
# [53..58] - Installation screen
"00 00  Press  any key  to begin  the installation  phase. After you  "
"00 00  enter your Serial number and  Registration Number,  you will  "
"00 00  be prompted for the source drive and the Magic directory.     "
"00 00  Upon confirmation, Magic will be installed on your hard disk. "
"00 00  REMEMBER: You must also go through the  registration process  "
"00 00  before you can start working with Magic.                      "
# [59]
"01 10Source Drive: "
# [60]
"03 01Destination directory: "
# [61]
"00 00Alt-F4=Exit , Enter=Done"
# [62]
"00 00 Blanks cannot be used in a pathname"
# [63]
"00 00 Double '\' cannot be used in a pathname"
# [64]
"00 00 Enter installation diskette to drive "
# [65]
"00 00 Enter a drive letter"
# [66]
"00 00 Drive "
"00 00 does not exist"
# [68]
"00 00[ Checking Drive ]"
# [69]
"00 00 Error reading drive "
# [70]
"00 00 Error creating "
"00 00 directory"
# [72]
"00 00Please Wait"
# [73]
"00 00     Select Magic module to be registered"
# [74] - Help messages
"00 00                                                                            "
"00 00 Press any key to continue the registration phase"
"00 00 Enter your Registration Name (the same one you used to get the      Registration Number), and your Registration Number"
"00 00 You can quit installation with Alt-F4, or continue by pressing any other    key"
"00 00 The source drive should be one letter that designates the drive from        which Magic files are to be copied to your hard disk. Usually this is       drive A"
"00 00 The destination directory is the Drive:\Directory-Name you want Magic       files to be copied to. The default is C:\MAGIC"
"00 00 Use the arrow keys to select one of the above options."
"00 00 The Magic directory is the directory that was created by the installation   phase. Magic files should reside in this directory."
"00 00 Copy files from the distribution diskettes"
"00 00 Register your installed copy of Magic"
"00 00 Perform complete installation & registration"
"00 00 Be sure to use the same Registration Name you used to get the               Registration Number"
"00 00 Be sure to input the correct Registration Number"
"00 00 Press any key to exit"
"00 00 Press any key to exit"
"00 00 Press any key to continue with registration phase"
"00 00 Be sure the registration number is the same one you got from M.S.E.         If it is the same number, please call M.S.E again."
"00 00 Select Magic language support" ,
"00 00" ,
"00 00" ,
"00 00" ,
# [95] - Serial number help
"00 00 Please enter the software serial number from the distribution package"
# [96]
"00 00[ Help ]"
# [97]
"00 00[ Error ]"
# [98] - Installation / Registration choices
"00 00Installation - Copy files from the distribution diskettes"
"00 00Registration - Register your installed copy of Magic"
"00 00Both         - Perform a complete installation & registration"
# [101]
"00 00Alt-F4=Exit , Arrows=Highlight option , Enter=Execute"
# [102]
"00 00Alt-F4=Exit"
# [103]
"00 00read error. Retry installation"
# [104]
"00 00not found in source drive. Retry installation"
# [105]
"01 03Registration Name:"
# [106]
"03 01Registration Number:"
# [107]
"00 00 Wrong registration number"
# [108]
"00 00 The Registration Name cannot be all blanks"
# [109] RT
"00 00 Registration Number must be at least 14 characters"
# [110]
"01 02 MAGIC directory: "
# [111..112]
"00 00 not found in "
"00 00 directory"
# [113..122] - Registration screen - 5 ACTIVE LINES
"00 00                                                                "
"00 00  The  Registration procedure  requires  that  you  enter  the  "
"00 00  Registration Name you  selected, and the Registration Number  "
"00 00  you have received from MSE.                                   "
"00 00 "
"00 00"
"00 00"
"00 00"
"00 00"
"00 00"
# [123]
"00 00Alt-F4=Exit , Any Key=Continue Registration"
# [124]
"00 00Alt-F4=Exit , Arrows=Highlight option , Enter=Choose"
# [125..128] - Extract errors
"00 00 Extract I/O error"
"00 00 Not enough memory to extract"
"00 00 Extraction of volume information failed"
"00 00 Magic serial number could not be found"
# [129.. 135] Confirm messages - Two blanks mark a new line
"00 00 Is your registration name identical to the one used  to get the registration number? (Y/N)"
"00 00 Are you sure you want to quit installation? (Y/N)"
"00 00 Are source and destination paths OK? (Y/N)"
"00 00 Destination directory does not exist.  OK to create? (Y/N)"
"00 00 Destination directory already exists.  Copy Magic into it? (Y/N)"
"00 00 Destination drive shows less free disk space then needed  to install Magic. Continue? (Y/N)"
"00 00 File already exist in the destination directory.  Overwrite? (Y/N)"
# [136] - Serial number
"00 00Serial Number:"
# [137] - Serial number error message
"00 00 The serial number entered is not valid"
# [138] - Installation screen for the demo version
"00 00                                                                "
"00 00  Press  any  key  to  begin  the  installation.  You will be   "
"00 00  prompted for the source drive and the Magic directory. Upon   "
"00 00  confirmation, Magic will be installed on your hard disk.      "
# [142] - Serial number window message
"00 00  Please enter your serial number located either on your "
"00 00  Magic diskette or on the back of your Magic package    "
# [144] - Languge - E, H
"00 00E"
#
# Variables
# -------------------------------------------
# [145] - Regist. name variable location
"01 23"
# [146] - Regist. number variable location
"03 23"
# [147] - Magic directory variable location
"01 20"
# [148] - Installation source drive
"01 25"
# [149] - Installation destination path
"03 25"
# [150] - Installation YyNn
"00 00YyNn"
# [151] - Installation Yes for display
"00 00Y"
# [152] - Installation Yes to check
"00 00Y"
# [153] - Installation No
"00 00N"
# [154] - overwrite with option.
"00 00 File already exist in the destination directory Overwrite?  (Y-Yes/N-No/O-Overwrite All/S-Skip All)"
# [155] - overwrite options list .
"00 00NYOS"

# Version 2
# -------------------------------------------
# [156] - Serial Number
"04 02Serial Number:"
# [157] - Registration number - serial screen
"06 02Registration Number:"
# [158] - Registration number variable location - serial screen
"06 23"
# [159] - Serial number variable location - serial screen
"04 23"
# [160] - Serial number variable location - serial screen
"00 00"
"00 00"
"00 00 No registration is needed for the products installed"
"00 00"
"00 00"

