                            Using NACS with NWSAA 1.3


NOTE:  NACS 3.0 cannot be installed on NetWare 4.0X

This document describes the procedures for 
  1. updating NACS 3.0.X originally installed on a CS 1.2 platform 
     which has been upgraded to a CS 1.3 platform
  2. installing NACS 3.0.X on a CS 1.3 platform.


I.  Update NACS 3.0.x installed on CS 1.2 upgraded to CS 1.3 platform
=====================================================================

This procedure is to be followed only in the scenario where NACS 3.0
was installed on a CS 1.2 platform and the system has been updated to
be CS 1.3.

After the CS 1.3 update has been completed execute the following steps:

1.  Backup the NACSPORT.CFG before proceding with the update.
2.  From the NetWare console, load the NetWare installation utility:
        :LOAD INSTALL
3.  Select "Product Options" 
4.  Press the "INSERT" key and enter the full path of the location of
    the NACS 3.0.X update files, or insert the NACS 3.0.X diskette into
    drive A:
5.  Select the "Install on this server" option.
6.  When the "Please Wait" window comes up, press ALT-ESC to switch
    to the NACS upgrade screen.  Hit any key to continue and complete
    the installation.
7.  After installing, restore your original NACSPORT.CFG file



II. Installing NACS 3.0.x on a CS 1.3 platform
==============================================

This procedure is to be followed if NACS 3.0 is to be installed on a 
CS 1.3 platform; i.e. NACS 3.0 is not currently installed on the system.

(assume NACS 3.0 DISK1 is in drive A:, NACS 3.0.X update diskette is in
 drive B:)

1.  Backup the NACSPORT.CFG before proceding with the update.
2.  Overwrite DISK1 of NACS 3.0 with the contents of the NACS 3.0.X update
    diskette:
        XCOPY B:*.* A: /S
3.  Delete the PRODUCT.DEF file
        DEL A:PRODUCT.DEF
4.  Rename the PRODUCT.IEF file to PRODUCT.DEF
        RENAME A:PRODUCT.IEF PRODUCT.DEF
5.  From the NetWare console, load the NetWare installation utility:
        :LOAD INSTALL
6.  Select "Product Options" 
7.  Press the "INSERT" key and enter the full path of the location of
    the (newly updated) NACS 3.0 files, or insert the (newly updated)
    NACS 3.0 diskette into drive A:
8.  Select the "Install on this server" option
9.  When the "Please Wait" window comes up, press ALT-ESC to switch
    to the NACS upgrade screen.  Hit any key to continue and complete
    the installation.
10. After installing, restore your original NACSPORT.CFG file.


