
  INSTRUCTIONS ON THE NETWARE COMMUNICATION SERVICES MESSAGE REFERENCE


    The NetWare Communication Services Message Reference presents
    messages that may appear on the Communication Services Event Log,
    the Communication Services Manager (CSM) console, the NetWare 
    system console, or the workstation at which you are running CSCON.

    These messages are presented in an on-line format.  The files are on
    the Communication Services Message Reference Diskette of this kit.
    This diskette contains the following infobase program and message
    reference files:

    o  CSHELP.EXE
    o  CSHELP.COM
    o  CSHELP.NFO


How to Load the Files to Your Disk

    Novell recommends that you load these files on your workstation
    rather than your server.  To load these files to your workstation's
    hard disk, do the following:

    1.  Create a new directory on your hard disk.
    2.  Insert the Communication Services Message Reference Diskette
        into your floppy drive.
    3.  Copy all the files from the Communication Services Message
        Reference Diskette to the new directory on your hard disk.
    4.  Remove the Communication Services Message Reference Diskette.


Viewing the Messages

    To bring up the on-line NetWare Communication Services Message
    Reference, do the following:
                                                              
    1.  Enter the following command at the DOS command line:

        CSHELP <Enter>

    	The Message Reference title page appears on your screen.
	
    2.	Press any key to display the Message Reference Help Menu
        and instructions.


Printing the Message Reference

    You may print part or all of the Message Reference.  To 
    do so, configure this document for your printer and decide
    how much of this document you want printed.


To configure for a printer:

    1.  In the CSHELP program press <Alt + F> to open the File Menu, 
        and select the Print command.

    2.  Select Install printer from the dialog box and press <Enter>.

    3.  Highlight the printer you want to set up, select the printer 
        port, then follow any additional prompts.  If you have a serial
        port, you will be prompted to set parity, data bits, stop bits, 
        and baud rate parameters.
	
    4.  Press <Enter> when all settings have been selected.  The 
        printer you selected will be one of the two default printers.


To print part of this document:

    1.  In the CSHELP program move your cursor to the first message 
        you want to print and press <Ctrl + B> to begin marking
        text.  

    2.  Page down until you have highlighted all the message 
        descriptions you want to print.

    3.  Press <Alt + F> to Open the File menu, and select the Print
        command. The print options box appears.

    4.  Select Print and press <Enter>. The print window appears.

    5.  Tab to the Scope box and select Tagged folio(s).

    6.  Press <Enter>.
    
    7.  If printing over a network, you may need to exit CSHELP 
        after step 6 in order for CSHELP to send your print job 
        to the printer.
		

To print the entire document:

    1.  In the CSHELP program start at the Message Reference Help Menu 
        screen.

    2.  Press <Alt + F> to open the File menu and select the Print
        command. The print options box appears.

    3.  Select Print and press <Enter>. The print window appears.

    4.  Tab to the Scope box and select Active view.

    5.  Press <Enter>.

    6.  If printing over a network, you may need to exit CSHELP
        after step 5 in order for CSHELP to send your print job 
        to the printer.
		

