MITSUBISHI 900

NOTES:  This is a dual NAM unit.
        The ESN prefix is 134 decimal, 86 hex.
        See file MITSTEST.TXT for test mode access.
        Mitsubishi: 708-860-4200

NAM programing:

1.  Press PWR key for one second to turn on phone.

2.  Wait for display to clear.

3.  Within ten seconds press and hold the END key while entering
    6 9 7 2 8 1 4 (reset code).

4.  Release END.

5.  The phone will display the first data entry.

6.  Press the SEND key to store information and increment the step number.

7.  Press CLR to correct any item.

8.  Press END to complete programing and exit.

PROGRAMING DATA:

STEP#    #OF DIGITS/RANGE    DISPLAY        DESCRIPTION

01       0 OR 1              duAL no        0=1 NAM, 1=2 NAMS
02       10 DIGITS           no1            NAM 1 MIN (AREA CODE AND TEL#)
03       00000 - 32767       SId1           NAM 1 SYSTEM ID
04       0 OR 1              LU1            NAM 1 LOCAL USE MARK
05       0 OR 1              E1             NAM 1 MIN MARK
06       333 OR 334          IPCH1          NAM 1 INITIAL PAGING CHANNEL
07       2 DIGITS            ACCOLC1        NAM 1 ACCESS OVERLOAD
08       0 OR 1              PS1            NAM 1 PREFERRED SYSTEM
09       00 TO 15            GIM1           NAM 1 GROUP ID (10 FOR USA)
10       0 OR 1              RI1            NAM 1 ROAM INHIBIT
11       0 OR 1              DTX1           NAM 1 VOX
12       0 OR 1              AR1            NAM 1 SYSTEM AUTO REDIAL

If you selected 0 in step one go to step 24

13       10 DIGITS           no2            NAM 2 MIN (AREA CODE & TEL#)
14       00000 - 32767       Sid2           NAM 2 SYSTEM ID
15       0 OR 1              LU2            NAM 2 LOCAL USE MARK
16       0 OR 1              E2             NAM 2 MIN MARK
17       0333 OR 0334        IPCH2          NAM 2 INITIAL PAGING CHANNEL
18       00 TO 15            ACCOLC2        NAM 2 ACCESS OVERLOAD CLASS
19       0 OR 1              PS2            NAM 2 PREFERRED SYSTEM
20       00 TO 15            GIM2           NAM 2 GROUP ID (10 IN USA)
21       0 OR 1              RI1            NAM 2 ROAM INHIBIT
22       0 OR 1              DTX1           NAM 2 VOX
23       0 OR 1              AR1            NAM 2 SYSTEM AUTO REDIAL

24       0000 TO 9999        SECUrity       SECURITY CODE
25       0 OR 1              EE             END TO END (DTMF) DIALLING
26       0 OR 1              C DTMF         CONTINUOUS DTMF SIGNALLING
27       0 OR 1              AL             AUTO LOCK
28       0 OR 1              BO             HORN ALERT
29       0 OR 1              BEEP           TIMER AUDIO BEEP

NOTES:

To install lock code: With phone out of programming mode press FCN, 7,
NNNN LLL STO (where NNNN is 4 digit security code and LLL is new lock code).

LOCK: F 2.  UNLOCK: Enter three digit code, press SEND.

SYSTEM SELECT: F 1 displays current then press one of the following to change:
0 = Pref/non pref, 1 = Non pref/pref, 2 = Home only, 3 = Pref only, 4 = Non
pref only.