Adobe Type Manager (R) version 2.5    Release Notes
Windows version
October 28, 1992

Adobe Type Manager is a trademark of Adobe Systems Incorporated
registered in certain countries.  Copyrights 1983-1992 Adobe
Systems Incorporated.  All Rights Reserved.  Patents Pending


This document supplements the Adobe Type Manager User Guide.
Topics include:

1.   Disk Contents
2.   Installation Requirements
3.   What's New in Version 2.5
4.   ATM.INI
5.   ATM Control Panel
6.   PostScript Soft Fonts Listed in ATM Control Panel
7.   Use Pre-built or Resident Fonts Option
8.   Print ATM Fonts as Graphics
9.   Install as Autodownload fonts for the PostScript driver
10.  ATM and Printing
11.  Printer and Video Drivers
12.  Installing Fonts from the Adobe PlusPack and Adobe
     PostScript and Type Cartridges
13.  Installing ATM in the IBM OS/2 Windows Compatibility Box
14.  Application Notes
      - Adobe Illustrator 4.0
      - Corel Draw
      - Designer 3.1 and Charisma 2.1
      - FaceLift
      - Harvard Draw 1.0
      - Harvard Graphics 1.0 for Windows
      - Micrografx PostScript Driver
      - Norton Desktop for Windows 1.0
      - Quattro Pro for Windows 1.0
      - TypeAlign 2.0
      - Various Applications with Draft Mode Printing Feature
      - Various Font Management Utilities
      - Virus Protection Software
      - Word for Windows 2.0 and 2.0a
      - WordPerfect for Windows 5.1
15.  Novell Netware Considerations
16.  ATM and IBM 4029 Series Printers
17.  Troubleshooting
18.  Acknowledgments
 A.  ATM.INI parameters


1.   Disk Contents

The following files are found on your ATM disk(s):

ATM16.DLL	     Program file for Windows Standard mode
ATM32.DLL	     Program file for Windows 386 Enhanced mode
ATMSYS.DRV	     ATM System driver
ATMCNTRL.EXE	     ATM Control Panel
INSTALL.EXE	     ATM Installer
INSTALL.CNF	     ATM installation configuration file
PROGDISK (FONTDISK)  Disk ID file
README.TXT	     This README file
ATM.CNF		     Configuration file (might not be present on
		     upgrade disks)
FONTINST.TXT	     Font installation instructions for Adobe
		     Font Foundry, LaserTools PrimeType, and
		     the IBM OS/2 Windows Compatibility Box
		     (present on special ATM upgrade disk)

Your disk(s) might also contain a PSFONTS directory and a
PCLFONTS directory.  The PSFONTS directory contains PostScript
Font Outline (PFB) files and Printer Font Metrics (PFM) files.
The PCLFONTS directory contains PCL bitmapped font files, which
have filename extensions of either SFP or SFL.	The PCLFONTS
directory also contains Printer Font Metrics (PFM) files.


2.   Installation Requirements

To install ATM, you need a c:\ drive and sufficient disk space
for the ATM software and fonts.	 The amount of disk space you
need depends on the number of fonts included with your ATM
package.  The standard retail ATM package requires about 1.2
megabytes of free disk space.  The default directory for the
PostScript fonts is c:\psfonts.	 You can, however, install the
font files in any directory on any drive.


3.   What's New in Version 2.5

Version 2.5 of ATM introduces three new features:

* ATM now uses soft fonts that are created on-the-fly by certain
  Windows 3.1 printer drivers; this feature speeds printing for
  PCL printers and other printers with drivers that support soft
  font creation
* ATM now adds and removes fonts without requiring that you
  restart Windows
* When you install fonts, ATM lets you specify whether or not
  the fonts are automatically downloaded to PostScript printers
  when you print

The following paragraphs briefly describe these new features.

*   When running with Windows 3.1, ATM 2.5 prints soft fonts for
    printers whose drivers support on-the-fly soft font
    creation.  These printers include the HP LaserJet family of
    printers and IBM Lexmark printers.	This feature does not
    work with all printers that support downloaded printer soft
    fonts.  The printer's Windows 3.1 printer driver must also
    support on-the-fly soft font creation for this feature to
    work.  To determine whether a Windows 3.1 printer driver
    supports on-the-fly soft font creation, check the Printer
    Setup Options dialog box in the Windows Printer Control
    Panel.  If you do not see a "Print TrueType as Graphics"
    option, the driver most likely cannot create printer soft
    fonts on-the-fly.

*   ATM 2.5 now adds and removes fonts without requiring that
    you restart Windows.  When you use ATM to add and remove
    fonts while other applications are running, however, the ATM
    font changes are not always automatically available in the
    application font menus.  Some applications, such as Windows
    Write and Lotus 1-2-3 for Windows, update their available
    font lists immediately, while others, such as Lotus AmiPro
    3.0 and Aldus PageMaker 4.0, require that you re-select your
    printer before the ATM font changes appear in font menus.  A
    few applications, such as Adobe Illustrator 4.0 and
    QuattroPro for Windows 1.0, build their font menus when they
    are started.  You must restart these applications to see ATM
    font changes in their font menus.

*   When you add or remove fonts, the ATM 2.5 Control Panel
    automatically adds and removes soft font entries from the
    [PostScript, portname] sections in WIN.INI.	 (The
    [PostScript, portname] sections contain settings for
    PostScript printers.)  If you change printer ports, however,
    Windows creates a new [PostScript, portname] section and
    does not transfer font entries from other sections.	 You
    must reinstall your fonts to add soft font entries to the
    new [PostScript, portname] section. See "Install As
    Autodownload Fonts for the PostScript Driver" later in this
    README files for details.


A number of additional changes have been made in version 2.5:

*   ATM defers to resident and cartridge DeskJet fonts when you
    use the Windows 3.1 DeskJet driver that works with the
    Universal Printer driver.
*   ATM no longer disables application printing when you use the
    Windows 3.1 Generic Text driver (TTY.DRV). This driver
    supports only a single internal font.
*   Rotated text in graphics now displays correctly in Lotus
    1-2-3 for Windows.
*   ATM text in Lotus Freelance now prints correctly when any
    Windows 3.1 PCL printer driver is set up to print at lower
    print resolutions.
*   ATM now prints correctly to PCL printers when used with
    Aldus IntelliDraw.
*   The ATM 2.5 Installer installs ATM correctly when MoreFonts
    is present on the system.


4.   ATM.INI

ATM's initialization file, ATM.INI, is created during
installation.  It contains a list of fonts installed in ATM and
other ATM program-related settings.  See Appendix A at the end
of this README file for more technical information.


5.   ATM Control Panel

There is no longer a pre-defined limit to the number of fonts
you can install with the ATM Control Panel.  Windows does,
however, limit initialization files (including the ATM.INI and
the WIN.INI) to a size of 64K.	If this limit is reached,
Windows cannot open, read, or write properly to these INI files.

For Windows 3.0 and 3.0a, Microsoft recommends keeping
initialization files smaller than 32k in size.	Following this
recommendation, the maximum number of fonts that can be listed
in ATM.INI for Windows 3.0 or 3.0a is around 450 fonts.	 For
Windows 3.1, the only limit is the 64K maximum file size, which
is large enough for about 900 fonts.

Many applications limit the number of fonts that can be
displayed in their font menus.	For example, an application font
menu might show only 200 fonts even though you have installed
more than 200 ATM fonts.

The more fonts you add with ATM, the longer it takes Windows to
start.	The exact time required for Windows to start depends on
the type of processor you have and your system configuration.
To reduce the time it takes Windows to start, make more memory
available to Windows by, for example, removing Terminate and
Stay Resident (TSR) programs.  You can also reduce the time it
takes Windows to start by removing ATM fonts you use
infrequently.


6.   PostScript Soft Font Limits for Windows 3.0 and 3.0a

For Windows 3.1, there is no longer a 150 font limit on the
number of soft-font entries you can have for a PostScript
printer.  For Windows 3.0 and 3.0a, however, the maximum number
of soft-font entries per PostScript printer WIN.INI entry is
approximately 150.  The exact number depends on your particular
system configuration.  If you receive spurious printer-related
error messages when starting Windows or switching to a
PostScript printer, you might have too many soft font entries in
the printer's WIN.INI entry.  To correct the problem, try using
the ATM Control Panel to remove soft fonts you don't normally
use.

If you manually remove soft-font entries from the PostScript
printer section of the WIN.INI file, remember to adjust the line
"softfonts=nn" to show the new total number of soft-font
entries.  The ATM Control Panel automatically renumbers soft-
font entries in WIN.INI when you remove fonts.	ATM cannot,
however, correct misnumbered font entries.

The Microsoft Windows 3.1 PostScript driver lets you use a
synthesized italic style for a PostScript font even if the
outline font (PFB) file for the italic font is not present on
this system.  Windows, however, cannot provide the PostScript
driver with the correct font metrics for a synthesized italic
face, so the font is displayed with expanded character spacing.
Also, PostScript printers print the Roman (non-italic) face for
the synthesized italic face when you print.


7.   Use Pre-built or Resident Fonts

When you select the Use Pre-built or Resident Fonts option, ATM
lets PCL printer drivers use pre-built or printer-resident fonts
to print documents. When you clear the Use Pre-built or Resident
Fonts check box, ATM creates characters for PCL printer drivers
to print even when pre-built or printer-resident fonts are
available.

Although ATM does not require that you restart Windows after you
change the Use Pre-built or Resident Fonts option, you might
have to quit and restart applications for this option to take
effect.

If you are using Windows 3.1 with printer drivers that allow
soft fonts to be created on-the-fly (such as the PCL drivers),
you might want to turn this option off to speed printing.  It is
more efficient for a printer driver to create a soft font on-
the-fly than to download a pre-built font.  You can see if you
have any pre-built fonts installed for your PCL printer by
checking the printer driver's Fonts dialog box. To display the
driver's Fonts dialog box, choose Fonts in the driver's Printer
Setup dialog box.

When Use Pre-built or Resident Fonts option is selected, you
might find the characters of a printer-resident or soft font
that you place beneath a graphic image print on top of the
image.	To see an example of this problem, open an application
that lets you draw images over text, select the Courier font,
type some text, and draw a gray box on top of the text.	 The
font is covered by the gray box on the screen.	Now print with
the Use Pre-built or Resident Fonts option selected to see if
your printer prints the text on top of the gray box.  If the
text prints on top of the box, you will also have this problem
when you turn ATM off.	To correct this problem, clear the Use
Pre-built or Resident Fonts check box.

If you are using a printer driver that creates soft fonts on-
the-fly (such as the PCL printer drivers), you might have to
select the "Print ATM fonts as graphics" option for graphic
objects and text to print correctly.


8.   Print ATM Fonts as Graphics

For Windows 3.1 and later, ATM takes advantage of a new feature
available with some printer drivers that lets ATM use the driver
to create soft fonts on-the-fly.  Creating soft fonts on-the-fly
speeds printing.  Printer drivers that create soft fonts on-the-
fly include the drivers for the HP LaserJet family of printers
and the driver for the IBM Lexmark printers.

The Print ATM Fonts as Graphics option controls whether or not
ATM uses the soft font creation feature when it is available.
By default, the Print ATM Fonts as Graphics option is cleared
and ATM uses the soft font creation feature.  When you select
the Print ATM Fonts as Graphics option, however, ATM prints
characters as graphics. Selecting the Print ATM Fonts as
Graphics option can solve some printing problems, such as when
the text you place beneath a graphic image prints on top of the
graphic.

When you change the Print ATM Fonts as Graphics option while
other applications are running, the change usually takes effect
immediately.  In a few applications, such as Word for Windows
2.0 for example, you must re-select your printer before the ATM
print mode change takes effect.

If you set up your printer driver to print TrueType fonts as
graphics, ATM prints fonts as graphics regardless of how the
Print ATM Fonts as Graphics option is set.

Some applications, such as CorelDraw 3.0, always print text as
graphics.


9.   Install As Autodownload Fonts for the PostScript Driver

The Microsoft PostScript printer driver uses the [PostScript,
portname] section in the WIN.INI file to find the PostScript
soft fonts installed on the system.  As an example, the
following [PostScript, portname] section shows two soft fonts
installed for a PostScript printer connected to the parallel
port LPT1.

[PostScript, LPT1]
softfonts=2
softfont1=c:\psfonts\pfm\tkrg______.pfm;c:\psfonts\tkrg____.pfb
softfont2=c:\psfonts\pfm\tkb_______.pfm;c:\psfonts\tkb_____.pfb

Each of these soft font entries is made up of two parts:

* The first part is the path and file name of the soft font's
  printer font metrics (PFM) file

* The second part is the path and file name of the soft font's
  outline (PFB) file

The PFM file part is necessary for all PostScript fonts whose
character metrics are not hard-coded in the PostScript driver.
The PFB file part is needed only when you want the driver to
download the font outline with every print job.

To set up the Microsoft PostScript driver to automatically
download a font at print time, install the font with the
"Install as autodownload fonts for the PostScript driver" option
selected.  When this option is selected, ATM adds both the PFM
and PFB parts of the soft font entry.

You must also select the "Install as autodownload fonts for the
PostScript driver" option if you are installing the standard
Base35 fonts for a printer that does not contain them.	The
Base35 fonts (available with the Adobe PlusPack and the
PostScript Type Cartridge) are:	AvantGarde, Bookman, Courier,
Helvetica, Helvetica Narrow, NewCenturySchoolbook, Palatino,
Symbol, Times, ZapfChancery, and ZapfDingbats.	Most, but not
all, newer PostScript printers contain the Base35 fonts.

If you are adding fonts to ATM that are already resident in the
printer, you can uncheck this option to instruct the printer
driver not to send the font outline files to the printer at
print time.  With the "Install as autodownload fonts for the
PostScript driver" option unchecked, ATM adds only the PFM part
of the soft-font entries in WIN.INI. You should also uncheck
this option for fonts you plan to manually download to the
printer.

How ATM 2.5 Adds Base35 Fonts

When the "Install as autodownload fonts for the PostScript
driver" option is unchecked, ATM does not add soft font entries
to WIN.INI for the Base35 soft fonts.  The soft font entries for
these fonts are not needed because the font metrics for these
fonts are hard-coded in the driver.  If soft font entries for
the Base35 fonts are present in WIN.INI, however, they are
ignored by the PostScript driver at print time if the Base35
fonts are resident in the printer.  In other words, the
PostScript driver does not download the outlines of these fonts
if they are already present on the printer.  The only exception
to this rule is for the Bookman font.  If a Bookman PFB entry is
present in the WIN.INI, the driver downloads the outline file at
print time.  To correct this problem and to force the driver to
use the Bookman font resident in the printer, re-add the four
faces of Bookman with the "Install as autodownload fonts for the
PostScript driver" option unchecked


10.  ATM and Printing

ATM uses PostScript outline fonts to produce a smooth graphic
display of your fonts on-screen.  The fonts available for use
depend on the printer you have selected in your application.

The fonts available for non-PostScript printers are the printer-
resident fonts, the Windows internal bitmapped fonts, the
TrueType fonts installed on the system (for Windows 3.1), and
the PostScript fonts listed in the ATM Control Panel.

For PostScript printers, the fonts available are the printer-
resident fonts, the TrueType fonts installed on the system (for
Windows 3.1), and the PostScript soft-font entries listed in the
printer's [PostScript, portname] section in the WIN.INI file.
When you print to a PostScript printer, ATM does not have to be
active because it does not have to rasterize any fonts.	 Windows
and the PostScript driver download outline fonts to your
PostScript printer.

Print Resolution

For the highest print quality, Adobe recommends you set up your
printer to print at the highest resolution available.  Certain
PCL printer drivers do not properly set the print resolution.
They might appear to be set at 300 dpi resolution in the Windows
Printer Control Panel even though they are set to a lower
resolution.  Some applications fail to print correctly when your
PCL printer resolution is not set to 300 dpi.  Excel 3.0a, for
example, prints blank cells instead of ATM fonts when printing
ATM fonts as graphics and your PCL printer is not set to 300
dpi.  If you suspect your PCL printer driver is not set to 300
dpi, set the resolution to 75 dpi, save this option, and then
set the resolution back to 300 dpi.  When your printer
resolution is set to 300 dpi, the line "prtresfac=0" appears in
the PCL printer entry in the WIN.INI file.

Colored Text

ATM generates a graphic image of colored text regardless of the
ATM print mode (soft font or graphics) set with the Print ATM
Fonts as Graphics option.  To force ATM to generate black or
white soft fonts for monochrome printers and color soft fonts
for printers such as the HP PaintJet 300xl, add the following
[Colors] section to your ATM.INI file.

[Colors]
PrintColorGraphics=Off

See Appendix A for a description of this setting.  Be very
careful when you change ATM.INI. If you make a mistake, you can
make it impossible for ATM to start.


11.  Printer and Video Drivers

For the highest font rasterization quality, Adobe recommends you
use the latest Windows printer and video drivers.  If you are
using the Microsoft Windows 3.1 DeskJet driver version 1.2, make
sure to use the Universal Printer driver dated 06/29/92.


12.  Installing Fonts from the Adobe PlusPack and Adobe
     PostScript and Type Cartridges

Installing fonts from the Adobe PlusPack or for the Adobe
PostScript or Adobe Type Cartridge requires that you insert the
different font disks many times.  To avoid having to repeatedly
insert font disks, follow these steps:

  1. Create a temporary directory on your hard disk.

  2. Copy all the files from all the font disks to the temporary
     directory.

  3. Start the ATM Control Panel and choose Add. The Add ATM
     Fonts dialog box appears.

  4. Using the Directories list box, open the temporary
     directory.	 The names of all the fonts appear in the
     Available Fonts list.

  5. Select the fonts you want to add and either accept the
     default target directories or enter the names of the
     PostScript font directories you are using.

  6. Choose Add.  The fonts are added and you are returned to
     the ATM Control Panel.

  7. Choose OK to close the ATM Control Panel.

  8. Delete all the files in the temporary directory; then
     delete the temporary directory.


13.  Installing ATM in the IBM OS/2 Windows Compatibility Box

Before installing ATM version 2.5 over an existing version of
ATM in the IBM OS/2 Windows Compatibility box, you must first
edit the Boot section of your Windows SYSTEM.INI file.	Replace
the two lines

  SYSTEM.DRV=ATMSYS.DRV
  ATM.SYSTEM.DRV=SYSTEM.DRV

with this line

  SYSTEM.DRV=SYSTEM.DRV

After changing the SYSTEM.INI file, start Windows and install
ATM as instructed in the manual.  Be very careful changing the
SYSTEM.INI file.  If you make a make a mistake, you can make it
impossible for Windows to start.


14.  Application Notes

When you add or remove a font while an application is active,
the application font menus are not always updated automatically.
If you add or remove a font while one of the following
applications is active,

  AmiPro 3.0, Freehand 3.0, Freelance 1.0, PageMaker 4.0,
  Ventura Publisher for Windows, and WordPerfect 5.1.for
  Windows

you must re-select your printer to update the application's font
menu.

Adobe Illustrator 4.0

If you have Illustrator 4.0 and add or remove a font, you must
restart Windows for font changes to take effect in Illustrator.

If you are using the latest version of the Adobe Enumerator, you
need only restart Illustrator to see ATM font changes.	Make
sure Illustrator is closed, however, before using ATM to add or
remove fonts.

The two enumerator files PSENUM.DLL and RUN_ENUM.EXE, which
Illustrator uses to register ATM font changes, are located in
the Windows system directory.  If your enumerator files are
dated 7/17/92 or earlier, you need to obtain the most recent
versions of these files.  You can receive the updates to these
files free of charge by contacting Adobe Customer Support at
(415) 961-4992.	 You can also download these files from the
Adobe CompuServe forum.

If you are using Enumerator files dated 7/17/92 or earlier, you
have to restart Windows for ATM font changes to take effect.


CorelDraw!

CorelDraw! 3.0 now supports ATM fonts.	Adobe strongly
recommends that you obtain the maintenance release version 3.0b.
You must restart CorelDraw! for ATM font changes to take effect.
CorelDraw! version 2.0 does not support ATM fonts.


Designer 3.1 and Charisma 2.1

The lines used for underlines and strikeouts may appear broken
when using an ATM font.	 This is due the way these Micrografx
products handle character placement.

If you rotate text at a 90 degree angle and then stretch it, you
might find that the font will not be properly resized.	To avoid
this problem, first resize the font and then rotate it.

Rotating stretched text at a 180 degree angle might cause the
last letters in the text string to overlap.  To correct this
problem, first rotate the text by 180 degrees and then stretch
it.

Rotated text at certain angles will sometimes print with
expanded character spacing on non-PostScript printers.	To
correct this problem, try using the Print View option and
selecting the entire page.


FaceLift for Windows

FaceLift for Windows modifies the printer entries in the
WIN.INI.  If FaceLift is installed, the ATM Installer and
Control Panel do not recognize the installed PostScript printers
and cannot add PostScript soft-font entries for these printers.
Before adding fonts for PostScript printers, you must first
temporarily disable the "Print with FaceLift" option in FaceLift
Control Panel.	After the fonts have been installed, you can re-
enable "Print with FaceLift" option.


Harvard Draw 1.01

Harvard Draw 1.01 support ATM fonts.  You must restart the
application for ATM font changes to take effect.


Harvard Graphics 1.01 for Windows

Harvard Graphics cannot rotate ATM fonts.  Harvard Graphics uses
its own internal scalable fonts for all rotated text.

If you are using Harvard Graphics and ATM with a high-resolution
video driver, you must obtain the maintenance upgrade version
1.021 or higher.

If you make ATM font changes while Harvard Draw is running, you
must select another printer driver and switch back to the
original driver for the ATM font changes to take effect.


Micrografx PostScript Driver

The Micrografx PostScript driver has a non-standard printer
section structure in the WIN.INI.  PostScript soft fonts cannot
be installed to this driver using the ATM Installer and Control
Panel.	You can, however, install your fonts through the
Micrografx Printer Setup menu.	See your Micrografx manual for
instructions.


Norton Desktop for Windows 2.0

Due to the different structure of Norton Desktop's application
groups, the ATM icon might not be properly installed into the
Main group when you are running Norton as your desktop shell.
If this occurs, you must manually add the ATM Control Panel
icon.  The ATM Installer will, however, copy all of the
necessary files to your system and will configure Windows to run
ATM.  See the Norton Desktop manual for instructions on how to
install a new icon in a group.


Quattro Pro for Windows 1.0

You must restart this application for ATM font changes to take
effect.


PageMaker 4.0

For best results with ATM, set the "Vector text above" and
"Stretch text above" limits in the Preferences dialog box to
10000 pixels each.

If you make ATM font changes while PageMaker is running, you
must re-select your printer for the ATM font changes to take
effect.


TypeAlign 2.0

If you receive the error message "Application requested abnormal
termination" after installing TypeAlign under Windows 3.1, you
must manually remove the entry TALGNDLL.EXE from the load line
of the WIN.INI file.  TALGNDLL.EXE is not compatible with
Windows 3.1.  The Load= line in the WIN.INI file is in the
[windows] section. Be very careful when you change WIN.INI. If
you make a mistake, Windows will not work correctly.  TypeAlign
2.1 corrects this problem.


Ventura Publisher Windows Edition

Adobe recommends using version 4.1.  For upgrade information,
please contact Ventura at (800) 822-8221.

The fonts Helvetica and Times do not display correctly in
Reduced View.

If you make ATM font changes while Ventura Publisher is running,
you must re-select your printer for the ATM font changes to take
effect.


Word for Windows 2.0a

Double underlines may print as one thick underline at point
sizes larger than 18 points.  This is due to the method Word for
Windows uses to perform double underlining.

Smart quotes (characters Alt+0147 and Alt+0148) might print as
double single quotes with some printer drivers.	 The generic
bullet character (Alt+0149) might print as a lowercase o.


Various Applications with Draft Mode Printing Feature

Some applications which support draft mode printing do not print
graphics when they print in draft mode.	 When ATM is set up to
print ATM fonts as graphics, text might not print correctly in
draft mode. To correct this problem, clear the Print ATM Fonts
as Graphics option in the ATM Control Panel.


Various Font Management Utilities

Some font management utilities such as FontMinder 1.0 and the
font conversion utility AllType automatically update the ATM.INI
file.  You must restart Windows for font changes in the ATM.INI
file introduced by these utilities to take effect.


Virus Protection Software

Some virus protection software packages do not allow the ATM
Installer to replace previous versions of ATM software.	 If you
have this problem, first scan your hard drive for viruses.  Then
temporarily disable your virus protection software while you
install ATM.  Remember to re-enable your virus protection
software and re-scan your hard disk after installing ATM.


WordPerfect for Windows 5.1

ATM requires the standard Windows printer drivers in order to
print ATM text.	 You cannot print ATM fonts with the WordPerfect
printer drivers, unless you also use a third-party type utility
such as PrimeType from LaserTools.

WordPerfect for Windows uses its own screen fonts for preview,
so ATM is not active in WordPerfect preview mode

Some special characters in the ANSI character set (with values
higher than 128) do not print as displayed.  See your Windows
documentation for the ANSI character set.


15.  Novell Netware Considerations

Although ATM is not a network application, you can print to
network printers using ATM.  However, you must configure the
File Contents section in your print job definition to specify
Byte stream instead of Text.  The Byte stream option is required
because ATM sends raster graphics to non-PostScript printers.

To add fonts from a network drive, you must first load a
SHELL.CFG file containing the line "show dots = on".  Use
IPX.COM to load the SHELL.CFG file.

There is also a 34-character limit for the PostScript target
directories for the PFB and PFM files.	If your target directory
name exceeds this limit, use the MAP ROOT command (instead of
the usual map command) to map the directory to a simulated root
directory.


16.  ATM and IBM 4029 Series Printers

To use ATM with one of the IBM 4029 series printers, you must
install version 3.01 or later of the 4029 printer driver and
version 1.65 or later of the Generic printer driver.  These
versions are included with Windows 3.1.	 If you are using
Windows 3.0, contact your printer dealer or manufacturer for the
latest drivers.


17.   Troubleshooting

Justified Text Exceeds Right Margin On Screen

Justified text sometimes extends beyond the right margin on
screen, but prints correctly.  This happens particularly at
small point sizes.  Two situations can cause this problem:

*  Windows uses a screen font for a font of a different size.
   Turning off the Use Pre-built or Resident Fonts option in the
   ATM Control Panel corrects this problem.
*  The problem is caused by round-off errors occurring when an
   application calculates the total width of a line of text.
   This problem cannot be corrected.


Documents Containing the Arial MT and TimesNewRomanPS Fonts
Print Slowly

If, after upgrading to Windows 3.1, you find that documents
containing the fonts Arial MT and TimesNewRomanPS print more
slowly on a PostScript printer, you can take the following steps
to improve printing speed.  These fonts are often used as
substitutes for the font Helvetica and Times when included when
ATM is bundled with another product.

To make documents containing Arial MT and TimesNewRomanPS print
faster, add the following lines to both the [Aliases] section
and [Synonyms] section of your ATM.INI file.

   Helvetica=Arial MT
   Times=TimesNewRomanPS

The following two lines

   Helv=Arial MT
   Tms Rmn=TimesNewRomanPS

should already be present in both ATM.INI sections.


Helvetica and Times display upside-down.

If the fonts Helvetica and Times display upside-down, check the
ATM Control Panel to see if all of these fonts are installed:

* Helvetica
* Times
* Arial MT
* TimesNewRomanPS.

If you have all these fonts, you must manually edit the ATM.INI
file and replace the following four lines in the [Aliases] and
[Synonyms] sections

   Helv=Arial MT
   Helvetica=Arial MT
   Tms Rmn=TimesNewRomanPS
   Times=TimesNewRomanPS

with these two lines

   Helv=Helvetica
   Tms Rmn=Times.


18.   Acknowledgments

The ATM team would like to acknowledge the following people who
have contributed to the design and testing of ATM version 2.5:
Jeronimo Alves, Geoff Arnold, David Glassman, Jim Gutierrez,
Curtis Kunz, Jorge Lopez, Sasha Mobley, Sheila Rolfer, Nora
Sandoval, Scott Seltz, Greg Walker, Nelson Whitney, and Tokuro
Yamashiro.


Appendix A. ATM.INI Parameters

The following section contains technical information on ATM
version 2.5's initialization file.  This file is divided up into
six sections: Fonts, Setup, Settings, Mono, Aliases, and
Synonyms.

[Fonts]	  This section contains a list of all of the fonts
	  installed with ATM and the locations of the PostScript
	  PFM and PFB files for each font.  The fonts listed
	  here are available to all non-PostScript printers for
	  screen display and printing.	The fonts available to
	  PostScript printers are based on the PostScript
	  soft-font entries in the specific printer section of
	  the WIN.INI file and the ROM-based fonts in the
	  printer.  If a font is listed in both WIN.INI and
	  ATM.INI, ATM will rasterize the font to the screen.
	  The printing of fonts to PostScript devices is solely
	  the responsibility of the PostScript driver and
	  Windows.  ATM does not have to be active when printing
	  to PostScript devices.

	  Although a particular application will allow you to
	  bold or italicize a certain font, your PostScript
	  printer will not be able to render the bold or italic
	  font unless an outline for the bold or italic font is
	  available.  On non-PostScript printers, however, ATM
	  will synthesize a bold, italic or bold italic version
	  of a font based on the roman outline if the outline of
	  the desired font style is not present.

	  When the ATM 2.5 Installer creates the [Fonts] section
	  of the ATM.INI, it adds all the PostScript fonts found
	  in the installation disk as well as any PostScript
	  fonts listed as soft-font entries for PostScript
	  printers in the WIN.INI file.	 If you are upgrading
	  from a previous version of ATM, the Installer also
	  adds all the fonts listed in the current ATM.INI file.


[Setup]
PFM_Dir	  Default PFM directory for the ATM Control Panel when
	  adding PostScript fonts.
PFB_Dir	  Default PFB directory for the ATM Control Panel when
	  adding PostScript fonts.


[Settings]
FontCache=96	    Specifies the size of the font cache in
		    kilobytes.	This option is configurable
		    through the ATM Control Panel.  The default
		    is 96k.  Adobe recommends that this value
		    not be set to more than 64k for each
		    megabyte of physical memory.
ATM=On		    Determines whether or not ATM is loaded
		    at Windows startup time.
BitmapFonts=On	    This switch is set with the Use Pre-Built or
		    Resident Fonts check box in the ATM Control
		    Panel.  When this switch is on, ATM defers
		    to screen fonts, resident printer fonts, and
		    printer soft fonts rather than rasterizing
		    the font itself if the bitmap of the font
		    requested in available.  If you change this
		    switch, you do not have to restart Windows
		    for the change to take effect.  You might,
		    however, have to restart applications for
		    the setting to take effect. The default
		    setting is On.
SynonymPSBegin=9    This value specifies the point size at which
		    ATM starts using bitmap deferral for font
		    pairs listed in both the Aliases and
		    Synonyms sections.	The default is 9.  Adobe
		    recommends that you do not change this
		    setting.
QLCDir		    Indicates the path of the ATM QuickLoad
		    file, ATMFONTS.QLC.

		    ATMFONTS.QLC contains a list of installed
		    fonts and font metrics, which reduces
		    Windows startup time.  You can force ATM to
		    rebuild this file by deleting the file with
		    the MS-DOS DEL command and restarting
		    Windows.
Version=2.5	    This value enables the ATM Installer to
		    determine the version of ATM when ATM is not
		    active; otherwise, the Installer determines
		    the version of ATM from the ATM DLL.
DownloadFonts=On    This switch instructs ATM to print text as
		    soft fonts for Windows 3.1 printer drivers
		    that support this feature.


[Mono]
Courier=Yes	    This section contains a list of monospaced
LetterGothic=Yes    fonts.
PrestigeElite=Yes
Orator=Yes


[Aliases]   This section tells ATM to substitute the font on the
	    right of the equal sign for the font on the left of
	    the equal sign when an application requests the font
	    on the left of the equal sign.  The ATM Installer
	    defines aliases for the fonts Helv, Tms Rmn,
	    Courier, Roman, and Modern.

	    When the Use Pre-built or Resident Fonts option is
	    turned on, ATM uses the resident bitmapped fonts for
	    point sizes for which bitmaps exist. When The Use
	    Pre-built or Resident option is turned off, ATM uses
	    the PostScript outline font to rasterize all
	    sizes of the aliased bitmapped font.

Helv=Helvetica		   The fonts left of the equals sign are
Tms Rmn=Times		   Windows bitmapped fonts.  By using
Courier=Courier		   PostScript outline fonts, ATM can
			   rasterize a smooth font when these
			   fonts are requested at sizes not
			   available in bitmapped form.


Roman=Times		   These settings enable ATM to use
Modern=Helvetica	   PostScript outlines instead of the
			   standard Windows vector fonts.


Courier=Courier		   This setting is needed if an
			   application requests the smallest
			   available fixed-pitch font.	If this
			   line is not present, ATM provides
			   someapplications with a 1-point
			   Courier font.


Helv=Arial MT		   If you have received ATM bundled with
Helvetica=Arial MT	   another application, you might have
Tms Rmn=TimesNewRomanPS	   the fonts Arial MT and
			   TimesNewRomanPS Times=TimesNewRomanPS
			   instead the standard fonts Helvetica
			   and Times. You should have these
			   lines present in both the Aliases and
			   Synonyms sections.  These settings
			   tell ATM to use internal printer
			   fonts when printing Arial MT and
			   TimesNewRomanPS to a PostScript
			   printer.  This reduces the time
			   required to print documents and
			   improves the quality of bold and
			   italic text styles.

			   If you have all four faces
			   (Helvetica, Times, Arial MT and
			   TimesNewRomanPS), you should use the
			   font pairs Helv=Helvetica and Tms
			   Rmn=Times in these sections.


[Synonyms]


Helv=Helvetica		   Unlike the font pairs in the Aliases
Tms Rmn=Times		   section, the font pairs in the
Courier=Courier		   Synonyms are interchangeable.  This
			   means thatwhen the font Helv is
			   requested at apoint size not
			   available in bitmapped form, the font
			   Helvetica will be used.

			   In Windows 3.0 & 3.0a, when the font
			   Helvetica is requested and a
			   bitmapped Helv font of the exact size
			   is available, ATM will use the Helv
			   bitmap to display the font on the
			   screen.

			   In Windows 3.1, the screen fonts Helv
			   and Tms Rmn have been replaced by MS
			   Sans Serif and MS Serif, so screen
			   ATM.INI to override internal ATM
			   defaults.  The switch is global for
			   all applications.  While enabling
			   this switch might be useful for a
			   special purpose in a particular
			   application, it can also produce
			   unexpected results in other
			   applications.

PrintColorGraphics=Off	   This switch instructs ATM to print
			   colored text as soft fonts under
			   Windows 3.1 rather than as dithered
			   graphics.  The printer driver must
			   support soft font creation for this
			   switch to work.  For most printer
			   drivers, the resulting soft fonts
			   print as black or white fonts.



